The Stormwater Blog

In stormwater management, manufactured treatment devices (MTDs) are often recognized as innovative solutions for controlling runoff and enhancing water quality. Yet, despite their growing adoption, several misconceptions about these devices persist, leading to confusion and misinformed decisions. This blog will tackle some of the most prevalent myths surrounding MTDs, shedding light on their true capabilities and effectiveness.

Proper maintenance is hands-down the most important factor in the sustainability of any infiltration system. By their very nature, infiltration systems are difficult to inspect and maintain. The selection of a cost-effective and easy-to-access pretreatment system can mean a huge difference in maintenance expenses for years to come.

On the rare occasion I get invited to a party, I like preparing topical jokes, funny anecdotes, and ways of explaining my job as a stormwater engineer that won’t instantly put the other guests to sleep. So when someone asks what I do, I usually pique their curiosity by answering, “I make the world a cleaner place, one storm at a time.” This usually gets a follow-up question about what that means or a confused look and a request to tell another joke about pineapples.

Red flags are design elements that are commonly or easily overlooked and may need extra attention when designing. Considering the red flags upfront will expedite the design and fabrication process, and eliminate delays, installation, and performance issues.

Where are you buying structural backfill these days? Is what you need readily available, or are you looking outside your area and/or waiting an extended time for delivery? With available land space continuing to decrease, stormwater detention/retention is commonly being designed underground. The current construction boom and increasing detention volume requirements have made rock scarce and expensive in many parts of the country.

As we return to work after the Christmas break, we can’t help but look forward to 2023 and what the future holds for stormwater management. We reached out to several Contech associates to get their insight. Here is what they had to say.

Corrugated metal pipe (CMP) is the “go-to” material for most stormwater detention and infiltration projects. A wide range of gages, corrugations, and diameters

As previously discussed in our “Construction Cover vs. Post Construction Cover” blog post, the total cover required for a system is the combination of the

If you’ve ever been confused about the cover requirements over underground detention systems, you’re not alone. Why do the requirements change during

Sloping fills over underground corrugated metal pipe (CMP) is an obstacle and consideration when choosing a suitable stormwater detention location. While it is